Login to Your Account

Free Recharge

Results 1 to 4 of 4

Thread: SSC: Junior Engineer (Civil & Electrical) Exam & Syllabus

  1. #1

    SSC: Junior Engineer (Civil & Electrical) Exam & Syllabus

    Scheme of Examination
    The Examination will be conducted in two stages:
    Written Test (500 marks)
    Interview (100 marks)
    Paper I: Objective type
    General Intelligence & Reasoning
    General Awareness
    Part A: General Engineering (Civil & Structural)
    Part B: General Engineering (Electrical)
    Part C: General Engineering (Mechanical)
    Paper II Conventional Type
    Part A: General Engineering (Civil & Structural)
    Part B: General Engineering (Electrical)
    Part C: General Engineering (Mechanical)
    1. In Paper I and Paper II for General Engineering, the candidate can attempt any one part i.e. Part A or Part B or Part C.
    2. Candidates are allowed to bring their own Slide–Rule, Non Programmable Calculator, Logarithm Tables and Steam Table for Paper-II only. They are not allowed for Paper I.
    3. Candidates qualifying in Paper I only those will be evaluated Paper II.
    Mobile Phone or any other electronic / electrical device other than specified Calculator is not permitted.
    4. There will be negative marking of 0.25 marks for each wrong answer in Paper I.
    5. Candidates, who secure at least the minimum qualifying marks in the written examination, are eligible to appear for Interview. The interview will be held at places as may be decided by the Commission.
    6. SC/ST candidates called for interview will be paid TA as per Government Orders. However no TA is payable to any candidate for appearing in the written examination.
    7. Canvassing in any form will disqualify the candidate.
    Questions in Engineering subjects will be approximately of the level of Diploma in Engineering (Civil, Electrical, Mechanical etc) from a recognized Institute, Board or University and recognized by All India Board of Technical Education. All the questions will be set in SI units.
    The details of the syllabus are given below:
    PAPER I – Part I (General Intelligence & Reasoning)
    The Syllabus for General Intelligence would include questions of both verbal and non-verbal type, it includes questions on:
    Space visualization
    Problem solving
    Decision making
    Visual memory
    Relationship concepts
    Arithmetical reasoning
    Verbal and figure classification
    Arithmetical number series.
    The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
    PAPER II – Part II (General Awareness)
    Questions will be aimed at testing the candidate's general awareness of the environment around him/her and its application to society. Questions will be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and neighbouring countries especially pertaining to:
    Economic Scene
    General Polity
    Scientific Research
    PAPER II – Part III (General Engineering)
    A. Civil Engineering
    Building Materials
    Physical and Chemical properties
    Standard tests
    Uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), Asbestos products, Timber and Wood based Products, laminates, bituminous materials, paints, varnishes.
    Principles of surveying
    Working of prismatic compass and bearings
    Plane table surveying
    Theodolite traverse
    Adjustment of theodolite
    Levelling and contouring
    Refraction correction
    Permanent adjustment of dumpy level
    Methods of contouring and uses of a contour map
    Tachometric survey.
    Soil Mechanics
    Origin of soil phase diagram
    Of void ratio porosity
    Degree of saturation
    Water content specific gravity of soil grains and unit weights
    Grain size distribution curves for different solid and their uses
    Atterjerg's limits isi soil classification
    Plasticity chart
    Coefficient of permeability
    Effective stress
    Consolidation of soils.
    Calculation shear strength of soils
    Direct shear test
    Vane shear test
    Triaxial test
    Soil compaction
    Lab compaction
    Lab compaction test
    Moisture content and bearing capacity of soils
    Plate load test
    Standard penetration test.
    Fluid properties
    Measurements of flow
    Bernoulli's theorem and its application
    Floor through pipes
    Flow in open channels
    Pumps and turbines.
    Environmental Engineering
    Quality of water
    Source of water supply
    Purification of water
    Distribution of water
    Need of sanitation
    Sewerage systems
    Circular sewers
    Oval sewer
    Sewer appurtenances
    Surface water drainage sewage treatments
    B. Electrical Engineering
    Basic Electrical Engg. & Electt. Measurements
    Concepts of currents
    Power and energy
    Their units
    Ohm's law.
    Circuit Law: Kirchhoff’s law
    Solution of simple network problems
    Network theorems and their applications
    Electro-magnetism concept of flux
    Magnetic circuits
    Electro-magnetic induction
    Self and mutual inductance.
    A.C. fundamentals
    R.m.s. And average values of alternating waves
    Equation of sinusoidal wave form
    Simple series and parallel a.c. Circuits consisting of R.L. and C. Resonance
    Measurement and measuring instruments
    Moving coil and moving iron ammeters and voltmeters
    Extension of range
    Watt meters
    Basic Electronics
    Electrical machines
    Basic principles D
    C motors of generators
    Their characteristics
    Speed control and starting of D.C. motors
    Losses and efficiency of D.C. machines.
    1-phase and 3-phase Transformers
    Principles Of Operation
    Equivalent Circuit
    Voltage Regulation O.C. And S.C. Tests
    Auto Transformers
    Synchronous Machines
    Generation Of Three Phase Emf
    Armature Reaction
    Voltage Regulation
    Parallel Operation Of Two Alternators
    Staring And Applications Of Synchronous Motors
    3-Phase Induction Motor
    Rotating Magnetic Field
    Principle Of Operation
    Equivalent Circuit
    Torque Speed Characteristics
    Starting And Speed Control Of 3-Phase Induction Motors
    Fractional Kw Motors
    1-Phase Induction Motors A.C. Series Motor
    Reluctance Motor
    General, Transmission and Distribution
    Different types of power stations
    Load factor
    Diversity factor
    Demand factor
    Simple problems thereon
    Cost of generation inter connection of power stations
    Power factor improvement
    Various types of tariffs
    Types of faults
    Short circuit current for symmetrical faults
    Switchgears-rating of circuit breakers:
    - Principles of a are extinction by oil and air
    - H.R.C. fuses
    - Protection earthier leakage
    - Over current Buchhotgz relay
    - Merz-Prince system of protection of generators & transformers
    - Protection of feeders and bus bars.
    - Lightning arresters
    - Various transmission and distribution systems
    - Comparison of conductor materials
    - Efficiency for different systems.
    Utilization of Electrical Energy
    Electric heating
    Electric welding
    Electric drivers and motors
    C. Mechanical Engineering
    Flow of Fluids
    Laminar & turbulent flow
    Equation of continuity
    Bernoulli's theorem
    Measurement of discharge
    Flow through pipes
    Friction losses
    Forces of jet impinging on vanes
    Work done and efficiency
    Classification of turbines & pumps
    Thermal Engineering
    Laws of thermodynamics
    Change in entropy in various processes
    Properties of steam
    Uses of steam table & charts
    Construction and Working of Cochran
    Lancashire Locomotive and Babcock and Wilcox boilers
    Working of steam turbine
    Otto and Diesel Cycles
    Working of IC engines
    Solex Carburettor
    Diesel fuel pump & injector
    Cooling & lubrication
    Production Engineering
    Foundry-Different casting processes
    Concept of patterns
    Types of mould making
    Puring defect in castings
    Causes & remedies
    Welding-classification and types of welding
    Testing and defects in welds
    Lathes-working of lathe:
    - Various tools
    - Operation on lathes
    - Types of lathes
    - Drilling operations performed on drilling machines
    - Description
    - Principles of working and various operations on machine tools milling machine
    - Shaper
    - Grinder
    - Boring and slotting machines
    Strength of Materials
    Stresses in composite bars
    Relation between elastic constants
    Resilience under different types of loads
    SF and BM diagrams
    Stresses in bearns-combined direct and bending stresses
    Struts and columns - Euler's and Rankin's theories
    Torsion of circular shafts
    Theory of Machines
    Simple Mechanisms - Four bar chain
    Slider crank chain
    Double slider crank chain
    Flywheel - Turning moment diagrams
    Fluctuation of energy
    Friction-in collar and pivots
    Plate clutch
    Conical clutch
    Journal bearing
    Transmission of power through flat and V- belts
    Gears, profile of gears
    Governors-Watt and Hartnell governors
    D. Structural Engineering
    Theory of structures
    Elasticity constants
    Types of beams
    Determinate and indeterminate
    Bending moment and shear force diagrams of simply supported
    Cantilever and over hanging beams
    Moment of area and moment of inertia for rect. & circular section
    Bending moment and shear stress for tee
    Channel and compound sections
    Dams and retaining walls
    Eccentric loads
    Slope deflection of simply supported and cantilever beams
    Critical load and columns
    Torsion of circular section.
    Concrete Technology
    Advantages and uses of concrete
    Cement aggregates
    Importance of water quality
    Water cement ratio
    Mix design
    Finishing and curing of concrete
    Quality control of concrete
    Hot weather and cold weather concreting
    Repair and maintenance of concrete structure
    RCC Design
    RCC beams:
    - Flexural strength
    - Shear strength
    - Bond strength
    - Design of single reinforced beams
    - Lintels
    - Cantilever beams
    - Double reinforced beams
    - One way slabs
    - Two way slabs
    - Isolated footings
    - Reinforced brick work
    - T-beams
    - Columns
    - Staircases
    - Retaining walls water tanks (RCC design questions may be based on both Limit State method and Working Stress method)
    Steel Design
    Steel design and construction of steel columns
    Beams roof trusses plate girders

  2. #2

    Re: SSC: Junior Engineer (Civil & Electrical) Exam & Syllabus

    send me ssc previous ques papers

  3. #3

    Re: SSC: Junior Engineer (Civil & Electrical) Exam & Syllabus

    please send mechanical objective book for junior enggineer for rrb

  4. #4

    Re: SSC: Junior Engineer (Civil & Electrical) Exam & Syllabus

    i want quantitative apptitude book aggrawal
    plz send this.......................

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Share anywhere and get download.