1:02:52 Mod-1 Lec-1 Overview of the Course, Practical and Research Trends

59:09 Mod-1 Lec-2 Harmonic and Periodic Motions, Vibration Terminology

59:05 Mod-2 Lec-1 Vibration Model, Equation of Motion-Natural Frequency

59:16 Mod-2 Lec-2 Energy Method, Principle of Virtual Work

58:47 Mod-3 Lec-1 Viscously Damped Free Vibration Special Cases: Oscillatory

59:32 Mod-3 Lec-2 Logarithmic Decrement Experimental Determination of Damping Coefficient Hysteresis Loop

55:23 Mod-3 Lec-3 Coulomb Damping other Damping Models

56:42 Mod-4 Lec-1 Forced Harmonic Vibration, Magnification Factor

58:27 Mod-4 Lec-2 Laplace Transform, Superposition Theorem

58:32 Mod-4 Lec-3 Rotor Unbalance and Whirling of Shaft, Transmissibility

59:38 Mod-4 Lec-4 Support Motion, Vibration Isolation

58:35 Mod-4 Lec-5 Sharpness of Resonance, Vibration Measuring Instruments

59:53 Mod-5 Lec-1 Generalized and Principle Coordinates, Derivation of Equation of Motion

59:23 Mod-5 Lec-2 Lagranges's Equation

1:00:18 Mod-5 Lec-3 Coordinate Coupling

58:06 Mod-5 Lec-4 Forced Harmonic Vibration

59:29 Mod-6 Lec-1 Tuned Absorber, Determination of Mass Ratio

59:11 Mod-6 Lec-2 Tuned and Damped Absorber, Untuned Viscous Damper

59:05 Mod-7 Lec-3 Modal Analysis: Undamped

59:01 Mod-7 Lec-4 Modal Analysis: Damped

59:00 Mod-8 Lec-1 Simple Systems With One Two or Three Discs Geared System

1:02:25 Mod-8 Lec-2 Multi-Degree of Freedom Systems-Transfer Matrix Method Branched System

58:24 Mod-9 Lec-1 Derivation of Equations of Motion Part 1-Newton's and Hamilton's Principle

59:53 Mod-9 Lec-2 Derivation of Equations of Motion Part 2-Newton's and Hamilton's Principle

57:00 Mod-9 Lec-3 Vibration of Strings

1:00:59 Mod-9 Lec-4 Longitudinal and Torsional Vibration of Rods

58:43 Mod-9 Lec-5 Transverse Vibration of Beams, Equations of Motion and Boundary Conditions

59:51 Mod-9 Lec-6 Transverse Vibration of Beams: Natural Frequencies and Mode Shapes

1:00:03 Mod-10 Lec-1 Rayleigh's Energy Method

1:00:11 Mod-10 Lec-2 Matrix Iteration Method

58:54 Mod-10 Lec-3 Durkerley, Rayleigh-Ritz and Galerkin Method

1:08:11 Mod-11 Lec-1 Finite Element Formulation for Rods, Gear Train and Branched System

58:25 Mod-11 Lec-2 Finite Element Formulation for Beams: Galerkin's Method

59:51 Mod-11 Lec-3 Global Finite Element Assembly and Imposition of Boundary Conditions

1:00:14 Mod-12 Lec-1 Vibration Testing Equipments: Signal Measurements

55:53 Mod-12 Lec-2 Vibration Testing Equipments: Signal Analysis

57:47 Mod-12 Lec-3 Field Balancing of Rotors

58:25 Mod-12 Lec-4 Condition Monitoring