Close
Login to Your Account
Faadooengineers
Results 1 to 10 of 10

Thread: Study Material and Projects Reports & Presentations

  1. #1
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Pdf 32 Study Material and Projects Reports & Presentations

    Drag Estimation of a Tata Nano Car


    All new free Mechanical Engineering Projects:

    1. Classification of Missiles
    2. Thermal Power Plants
    3. Design and Analysis of IC engine Piston
    4. Design of Flat plate with circular hole
    5. Analysis of Flow around an Aerofoil
    6. Drag Reduction using Aerofoil
    7. Study of Forgings
    8. Stresses in flat plate with discontinuity

    100% free download. Genuine and new.
    For more projects visit: Mechanical Engineering Projects



    Last edited by sai.manohar; 9th December 2016 at 11:35 PM.

  2. #2
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    Full Final Year Project Report & Presentation: Aerodynamic Flow Analysis around a Sedan Car
    For free Major/Minor BTech./MTech Projects visit: Mechanical Engineering Projects
    Last edited by sai.manohar; 9th December 2016 at 11:36 PM.

  3. #3
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    All new free Mechanical Engineering Projects:


    1. Classification of Missiles
    2. Thermal Power Plants
    3. Design and Analysis of IC engine Piston
    4. Design of Flat plate with circular hole
    5. Analysis of Flow around an Aerofoil
    6. Drag Reduction using Aerofoil
    7. Study of Forgings
    8. Stresses in flat plate with discontinuity


    100% free download. Genuine and new.
    For more projects visit: Mechanical Engineering Projects

  4. #4
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    For more free projects downloads visit :Mechanical Engineering Projects
    Last edited by sai.manohar; 9th December 2016 at 11:36 PM.

  5. #5
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    Full Final Year Project Report & Presentation: Thermal Power Plants
    For free Major/Minor BTech./MTech Projects visit: Mechanical Engineering Projects
    Last edited by sai.manohar; 6th August 2016 at 02:53 PM.

  6. #6
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    Nuclear Power Plants: Energy cannot be created nor be destroyed but it can be converted from one form to another. Nearly all the mass of the atom is concentrated in a tiny nucleus at the center. The nucleus is composed principally of two sorts of particles: the proton, which carries the positive charge and the neutron, which is electrically neutral and has a mass slightly bigger than that of proton. Nuclear energy is the energy released from the nucleus of an atom. When nuclear reaction occurs, fission or fusion, it produces large amount of energy.
    When the heaviest element, uranium was bombarded with neutrons, it was discovered that instead of inducing radioactivity as some other elements did, something different happened. This process is named fission. When fission occurred, not only were two lighter elements and a lot of radiation produced, but also more neutrons. These neutrons could in turn also cause fission, producing more neutrons and developing a chain reaction, which might spread throughout all the uranium present. A lot of energy is released in the process of fission or fusion.
    This energy generated during controlled fission or fusion can be converted to produce heat to produce steam, which in turn may drive a prime mover thus producing mechanical work. This mechanical work may be utilized to produce electricity. A nuclear power plant utilizes the nuclear energy in a controlled manner to produce electricity. Nuclear power plants are powerful and efficient, have low greenhouse gas emission and produces cheap electricity. However they also produce radioactive wastes, which is difficult to dispose and have a high installation cost also having a tremendous negative impact on plant and animal lives. A number of international treaties and guidelines dictate the setting of nuclear power plants.
    The US, France, Russia, Japan and South Korea are the top nuclear power generating countries in the world. The share of nuclear power in total power generated in the world is only 10% with 439 commissioned throughout the world. India currently has 21 nuclear power reactors with a total installed capacity of 5780 MW.
    This report studies in detail the history of usage of nuclear power, the physics behind the nuclear fission and fusion process. The design and thermodynamics behind nuclear power plant is also described including the advantages and dis-advantages of nuclear energy. Finally the nuclear disasters and the current nuclear power scenario in the world and in India are described in detail.







  7. #7
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    THERMO STRUCTURAL DESIGN OF IC ENGINE PISTON
    Abstract: During the combustion of fuel in an IC engine very high temperature of the order of 2100-2200C is produced inside the combustion chamber. The pressure generated inside the combustion chamber during its cycle of operation is 50-60 bar. This high pressure and temperature exerts a severe thermo structural loads on an IC engine components namely combustion chamber, piston and valves.

  8. #8
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    Last edited by sai.manohar; 9th December 2016 at 11:35 PM.

  9. #9
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    Last edited by sai.manohar; 9th December 2016 at 11:34 PM.

  10. #10
    Active FaaDoO Engineer sai.manohar's Avatar
    Join Date
    Dec 2015
    Posts
    139

    Gender: : Male

    Branch: : Mechanical Engineering

    City : Hyderabad*

    Re: Study Material and Projects Reports & Presentations

    Searching for good websites on mechanical engineering.