Sony Placement Paper 2011:

  • PIN diode largest layer
  • Open loop transfer function of G(s)=3 (s+2)/s2(s+4)
  • He-Ne laser is a ______________level system
  • Guided mode, the normalized propagation lies between______________
  • Signal is periodic if and only if
  • A real valued signal X(n) is called symmetric if____________
  • Belt weighting system is a_____________
  • Feed back relay it is a/an_____________
  • Pressurization type another name_________________
  • Software linearization is best for _________________
  • Two –port network is reciprocal if and only if.__________
  • Pipeline improve cpu performance in_______________
  • Fast process likes flow control in _____________
  • A machine cycle refer to______________
  • Illegal 8086 instruction__________
  • 8255 ic receive a rset signal_________
  • PSW reg. In 8085 microprocessor is___________
  • 8051 on chip RAM is ___________
  • CMP instruction in 8085 microprocessor________________
  • Charge amplifier is used in___________
  • Quality factor parallel LR circuit___________
  • System has a single pole at origin its impulse response will be_______________
  • Transfer function defined___________
  • Settling time of second outer system_____________
  • Transfer function of 1000/(1+0.1s) (1+0.01s)_______________